3. INSPECTION/ADJUSTMENT
SERVICE INFORMATION
GENERAL
! WARNING
• Before running the engine, make sure that the working area is well ventilated. Never run the engine in a
closed area. The exhaust contains poisonous carbon monoxide gas, which may cause death to people.
• Gasoline is extremely flammable and is explosive under some conditions. The working area must be
well ventilated and do not smoke or allow flames or sparks near the working area or fuel storage area.
SPECIFICATIONS
ENGINE
Throttle grip free play : 2~6 mm
Spark plug
Spark plug gap
Valve clearance
Idle speed
Engine oil capacity:
Cylinder compression: 16±2 kg/cm²
At disassembly
At change
Gear oil capacity
At disassembly
At change
TIRE
Front
Rear
TIRE SPECIFICATION
Front : 120/80-14 58S
Rear : 150/70-13 64S
TORQUE VALUES
Front axle nut
: 2 kg-m
Rear axle nut
: 12 kg-m
SPECIAL TOOL
Tappet Adjuster
3-1
: NGK: CR7E
: 0.6 mm ~ 0.7 mm
: IN: 0.10 mm
: 1600±100 rpm
: 1.5 Liter
: 1.3 Liter
:
: 0.23 Liter
: 0.21 Liter
1 Rider
2.00 kg/cm²
2.25 kg/cm²
E012
EX: 0.10 mm
Ignition timing
Coolant type
DOWNTOWN 200i
: ECU
: Water Cooling
2 Riders
2.00 kg/cm²
2.25 kg/cm²