Right Crankcase Cover Removal; Stator Removal - KYMCO People GT 200i Service Manual

10. A.C. GENERATOR/STARTER CLUTCH

RIGHT CRANKCASE COVER REMOVAL

Disconnect the water hoses from the water
pump cover.
Disconnect the water hoses from the right
crankcase cover.
Remove 12 bolts
crankcase cover and the cover.
Remove the bolt between water pump cover
and oil filter.
Remove right crankcase cover.

STATOR REMOVAL

Remove two screws attaching the pulsar coil.
Remove three A.C. generator stator bolts and
the stator.
When removing the pulsar coil and
stator, be careful not to damage them to
avoid short-circuit or broken wire.
10-3
attaching the right
Oil filter
Screws
Pulsar Coil A.C. Generator Stator
People GT 200i
Water Hose