Radiator - KYMCO Downtown 200i Service Manual

12. COOLING SYSTEM
COOLING SYSTEM TESTING
RADIATOR CAP INSPECTION
Install the radiator cap onto the radiator tester
and apply specified pressure to it. It must hold
specified pressure for at least six seconds.
＊
Apply water to the sealing cap surface
before testing.
Radiator Cap Relief Pressure:
0.9±0.15 kg/cm²
Install the radiator tester onto the radiator and
apply specified pressure to it. It must hold
specified pressure for at least six seconds.
Check the water hoses and connectors for leaks.
＊
The test pressure should not exceed 1.05
kg/cm². Excessive pressure can damage
the radiator and its hose connectors.

RADIATOR

RADIATOR INSPECTION
Remove the front cover.
DOWNTOWN 200i
Radiator Tester
Radiator Cap
12-4