Starter Motor - KYMCO Downtown 200i Service Manual

18. STARTING SYSTEM

STARTER MOTOR

REMOVAL
Before removing the starter motor, turn the
ignition switch OFF and remove the battery
ground. Then, turn on the ignition switch
and push the starter button to make sure the
starter motor can't operate securely.
Remove the seat, met-in box and carrier.
Remove the body cover, center cover and rear
fender A together.
Remove the nut goes to the starter relay and relax
cable band to disconnect the starter motor cable.
Remove two start motor mounting bolts and the
motor.
18-3
DOWNTOWN 200i
Nut
Starter Motor Cable
Bolts