Oil Pump - KYMCO Downtown 200i Service Manual

4. LUBRICATION SYSTEM
OIL PUMP REMOVAL
Remove twelve bolts attaching the right crankcase
cover.
Remove the A.C. generator flywheel with special
tool.
Special tool:
Flywheel Puller
Universal Holder
Remove the gasket and dowel pins.
Remove the starter idle gear and starter clutch.
Remove the two bolts and oil separator cover.
Remove the oil pump driven gear clip to remove
the oil pump driven gear and drive chain.
4-5
E003
E021
DOWNTOWN 200i
Starter Idle Gear
Dowel Pin
Oil Separator Cover
Oil Pump Drive Chain