10. A.C. GENERATOR/STARTER CLUTCH
INSTALLATION
Install oil pump and tighten two bolts.
Make sure that the pump shaft rotates freely.
The arrow of oil pump is upside.
Install cam chain.
Install the pump drive chain and driven gear,
then set the clip securely on the pump shaft.
Install the oil separator cover properly.
Fit the tab of the separator cover into the slit
in the separator.
10-7
Arrow Mark
Bolts
Oil pump
Oil Pump Drive chain
Oil Pump Driven Gear
Oil Separator Cover
DOWNTOWN 200i
Cam Chain
Cam Chain
Clip
Bolts