Removing And Installing The Feeds - DURKOPP ADLER 610 Service Instructions Manual

3.5.7 Removing and installing the feeds

Fig. 7: Removing and installing the feeds
(1) - Screw
(2) - Screw
Removing the feeds
1. Remove the screws (1,2).
2. Remove the main feed (3).
3. Remove the differential feed (4).
Installing the feeds
1. Install the main feed (3).
2. Tighten the screw (2).
3. Install the differential feed (4).
4. Tighten the screw (1).
16
①
②
Work fundamentals
④
③
(3) - Main feed
(4) - Differential feed
Service Instructions 610/630 - 00.0 - 10/2014