Thread Guide On The Machine Arm - DURKOPP ADLER 610 Service Instructions Manual

Thread guide on the machine arm

15 Thread guide on the machine arm
Check correct setting
If the looper is in the left end position (thread lever in the top dead center),
the thread forms a horizontal line between the thread guide (2) and the
thread lever (1).
Fig. 74: Thread guide on the machine arm
(1) - Thread lever
(2) - Thread guide
Setting steps
1. Loosen the screw (3).
2. Setting the thread guide (2).
3. Tighten the screw (3).
Service Instructions 610/630 - 00.0 - 10/2014
①
②
(3) - Screw
③
75