3.5.9 Removing and fitting the upper belt guard
Fig. 9: Removing and fitting the upper belt guard
(1) - Screws
(2) - Handwheel
Removing the handwheel
1. Loosen all 3 screws (1).
2. Remove the handwheel (2).
Removing the belt guard
1. Loosen all 4 screws (4) on the belt guard.
2. Remove the belt guard (3).
Fitting the belt guard
1. Fit the belt guard (3).
2. Secure the belt guard with all 4 screws (4).
Fitting the handwheel
1. Fit the handwheel (2).
2. Secure the handwheel by tightening the 3 screws (1).
18
①
②
Work fundamentals
③
(3) - Belt guard
(4) - Screws
Service Instructions 610/630 - 00.0 - 10/2014
④