Removing Covers; Access To The Underside Of The Machine - DURKOPP ADLER 610 Service Instructions Manual

Hide thumbs Also See for 610:

Table of Contents

Work fundamentals

3.5 Removing covers

For many setting operations, you must remove the machine covers in or-

der to access the components.

The following is a description of how to remove the individual covers and

fit them again. The text for the relevant setting operations then only men-

tions which of the covers must be removed.

In order to access the components on the underside of the machine, the

upper part of the machine must be tilted backwards.

Fig. 1: Tilting the upper part of the machine backwards and returning it to its upright position

(1) - Machine upper section

(2) - Support

Tilting the upper part of the machine backwards.

1. Tilt the upper part of the machine (1) back to the support (2) using the

Straightening up the upper part of the machine

2. Carefully tilt the upper part of the machine (1) forward to its upright posi-

Service Instructions 610/630 - 00.0 - 10/2014

WARNING

Risk of injury

Risk of crushing from moving parts

Switch off the sewing machine before removing or re-

fitting covers.

①

②

handle (3).

tion using the handle (3).

(3) - Handle

③

Table of Contents

630