Removing And Fitting The Covers On The Base Plate - DURKOPP ADLER 610 Service Instructions Manual

Work fundamentals
Fitting the arm cover
1. Fit the arm cover (1) carefully. Ensure that you do not catch or squeeze
2. Tighten all 3 screws (2).

3.5.4 Removing and fitting the covers on the base plate

Fig. 4: Removing and fitting the covers on the base plate
(1) - Cover, left
(2) - Opening
Removing the cover
1. Raise the left cover (1) using a small screwdriver at the opening (2) and
2. Raise the right cover (3) with a small screwdriver and remove.
Fitting the covers
1. Insert the cover (1).
2. Insert the cover (3).
Service Instructions 610/630 - 00.0 - 10/2014
the cables while doing so.
①
②
remove.
(3) - Cover, right
③
13