Removing And Inserting The Throat Plate - DURKOPP ADLER 610 Service Instructions Manual

Work fundamentals

3.5.5 Removing and inserting the throat plate

Fig. 5: Removing and inserting the throat plate
①
②
(1) - Screws (2) - Throat plate
Removing the throat plate
1. Lift and lock the sewing foot.
2. Loosen both screws (1).
3. Remove the throat plate (2) upwards.
Inserting the throat plate
1. Lift and lock the sewing foot.
2. Insert the throat plate (2) from above.
3. Tighten both screws (1).
14 Service Instructions 610/630 - 00.0 - 10/2014