Table of Contents
Advertisement
3.2 Sequence of settings
Always comply with the sequence of individual setting steps as specified.
Comply with the
sequence
It is absolutely essential that you comply with all notices regarding prereq-
uisites and subsequent settings that are marked with
3.3 Cable guidance
Ensure that all cables are laid in the machine such that the function of
Joining cables
moving parts is not hampered.
1. Lay cables that are too long in tidy loops.
2. Bind together the cable loops with cable ties.
3. Cut off the extending ends of cable ties.
3.4 Screws in safety covers
Screws in safety covers need not be removed from the screw hole. As
soon as the screws are loosened such that the cover can be detached,
you can remove the cover. The screws remain either in the housing or in
the cover. In the text, such screws are marked with the addition (safety
cover).
10
NOTE
Machine damage possible due to using the incorrect sequence.
It is essential that you comply with the sequence of work steps specified
in these instructions.
Tie loops wherever possible to fixed parts. The cables must be secured
firmly.
NOTE
Machine damage and function disruptions are possible due to in-
correctly laid cables.
Excess cables can impair the functioning of moving machine parts. This
impairs the sewing function and can result in damage.
Excess cable should therefore be laid as described above.
Work fundamentals
in the margin.
Service Instructions 610/630 - 00.0 - 10/2014
Advertisement
Table of Contents
