Removing And Installing The Throat Plate - DURKOPP ADLER M-TYPE 667 Service Instructions Manual

3.3.5 Removing and installing the throat plate

Fig. 5: Removing and installing the throat plate
Removing the throat plate
To remove the throat plate:
1. Loosen the screws (1).
2. Remove the throat plate (2).
Installing the throat plate
To install the throat plate:
1. Insert the throat plate (2).
2. Tighten the screws (1).
14
①
②
(1) - Screws
WARNING
Risk of injury from sharp and moving parts!
Crushing and puncture possible.
Switch off the machine before you remove or install
the throat plate.
(2) - Throat plate
Service Instructions 667 - 00.0 - 04/2016
Working basis