Table of Contents
Advertisement
Work fundamentals
3
3.1 Symbols in the text
The following symbols in the margin and in the text indicate the type of in-
formation contained in the text.
Correct setting
Indicates the correct setting.
Faults
Indicates faults that can occur due to an incorrect setting.
Cover
Indicates which covers must be removed in order to access the compo-
nents to be set.
Steps to be performed for servicing, maintenance and installation
Steps to be performed via the software control panel
The individual steps are numbered:
1. First setting step
1.
2. Second setting step
2.
3. Third setting step, etc.
3.
The sequence of setting steps must always be followed.
Result of performing an operation
If, as a result of a setting step, a change occurs in the machine or a new
message appears on the display which is important feedback for you, this
change is marked with an arrow:
Important
Indicates that special attention must be paid to this point when performing
a step.
Information
Provides additional information.
Sequence
Specifies the work to be performed before or after a setting.
Reference
A reference is provided to another place in the text.
Service Instructions 610/630 - 00.0 - 10/2014
Work fundamentals
9
Advertisement
Table of Contents
