DURKOPP ADLER 610 Service Instructions Manual page 79

Setting the tape feed (610)
Basic setting of the throttles
Fig. 76: Setting the throttles
(1) - Air throttle, reverse movement
(2) - Air throttle, tulle foot
• Tulle foot: 4 revolutions opened
• Tape clamp: 3 revolutions opened
• Reverse movement: 1.5 revolutions opened
• Feed movement: 1.5 revolutions opened
Information
• The edge on the base plate above the tape guide may not generate a
Setting the feed into the tulle foot
Fig. 77: Setting the feed into the tulle foot
(1) - Screws
1. Loosen the screws (1).
2. Move the tape guide to the side.
3. Tighten the screws (1).
Service Instructions 610/630 - 00.0 - 10/2014
①
②
③
braking effect.
①
④
(3) - Air throttle, feed movement
(4) - Air throttle, tape clamp
②
(2) - Screws
77