Table of Contents
Advertisement
Gauge and key set
4
The gauges listed below enable precise setting and testing of the classes
610 and 630.
The locking pin listed is included in the accessory pack with every machine
supplied. It can be used to lock handwheel positions A - F that are required
for the machine settings.
Fig. 19: Gauge and key set
Gauge
Service Instructions 610/630 - 00.0 - 10/2014
Gauge and key set
Order number Setting
0933 000735 Setting the rocker bolt in the looper
drive housing
0933 000739 K Setting the looper drive housing
9301 022608
Locking pin 5H8x60
included in the
For locking the handwheel in one
accessory
of the setting positions A - F
pack
0171 000981 To measure the needle evasive
movement (ellipsis width) of the
looper drive.
If you have your own dial gauge,
only the clamping sleeve 171 984
and measuring pin 933 748 are
required.
0171 290010 Slant of the looper of 89° 30'
25
Advertisement
Table of Contents
