Setting The Sewing Foot; Setting The Lifter Stroke - DURKOPP ADLER 610 Service Instructions Manual

Setting the sewing foot

8 Setting the sewing foot

8.1 Setting the lifter stroke

When the pedal is pressed backwards half-way, the sewing feet are lifted
during sewing, e.g. to move the material being sewn.
Correct setting
The distance between the lifted sewing feet and the throat plate is pre-set
to 9 mm on delivery.
Cover
Remove the head cover ( Section 3.5.2, pg. 12)
Fig. 24: Setting the sewing foot lifting height
②
①
(1) - Screw (2) - End stop
Setting steps
1. Loosen the screw (1).
2. Move the end stop (2) upwards.
3. Tighten the screw (1).
32 Service Instructions 610/630 - 00.0 - 10/2014