Removing And Installing The Motor Cover; Removing And Installing The Arm Cover - DURKOPP ADLER 911-211 Service Instructions Manual

Working basis

3.3.2 Removing and installing the motor cover

Fig. 2: Removing and installing the motor cover
(1) - Screws
Removing the motor cover
1. Loosen both screws (1).
2. Remove the motor cover (2).
Installing the motor cover
1. Fit the motor cover (2).
2. Tighten both screws (1).

3.3.3 Removing and installing the arm cover

Fig. 3: Removing and installing the arm cover
(1) - Screws
Removing the arm cover
1. Remove the motor cover.
2. Loosen the screws (1).
3. Remove the arm cover (2).
Installing the arm cover
1. Fit the arm cover (2).
2. Tighten the screws (1).
3. Press the hand crank and check for ease of movement; adjust the arm
4. Fit the motor cover.
Service Instructions 911-211 - 00.0 - 02/2015
①
①
cover position if necessary.
②
(2) - Motor cover
②
(2) - Arm cover
11