Table of Contents
Advertisement
7.3 Removing the transport locks
The transport locks protect the machine during movement and must be
removed prior to setup.
1. Remove all transport locks before setting up the machine.
Important
The transport locks must be assembled again prior to any future transport
of the machine.
7.4 Adjusting the working height
100
NOTICE
Property damage may occur!
Damage to the machine during transport.
NEVER transport the machine without the transport locks.
WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from incorrect
setting!
The operator can sustain musculoskeletal damage
if failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.
Operating Instructions 911-210-10 - 00.0 - 06/2020
Setup
Advertisement
Table of Contents
