Table of Contents
Advertisement
Operation
4.10 Sliding back the hood and removing the fabric sliding
To provide for easier access to the transport clamps, the hood can be
moved out of the way.
Fig. 16: Sliding back the hood and removing the fabric sliding plate (1)
(1) - Hood
To slide back the hood:
1. Switch off the machine.
2. Loosen the screw (2) on the hood (1).
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
plate
CAUTION
Risk of injury from moving parts!
Crushing possible.
Do not slide the hood back and remove the fabric
sliding plate back UNLESS the machine is switched
off.
NOTICE
Property damage may occur!
Risk of breakage.
If the shim kit has been fitted, the shims may become damaged
when the fabric sliding plate is removed.
Ensure that the shims have been moved out of the throat plate area.
①
②
(2) - Screw
27
Advertisement
Table of Contents
