Table of Contents
Advertisement
Safety
2
This section contains basic instructions for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to
follow the information included in the safety instructions. Failure to do this
can result in serious injury and damage to the machine.
2.1 Basic safety instructions
The machine may only be used as described in these operating instructions.
The operating instructions must be available at the machine's location at
all times.
Work on live components and equipment is prohibited. Exceptions are de-
fined in the specifications in DIN VDE 0105.
For the following work, the machine must be disconnected from the power
supply using the main switch or by disconnecting the power plug:
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
• Threading
Missing or faulty spare parts could impair safety and damage the machine.
Therefore only use original spare parts from the manufacturer.
Use a lifting carriage or forklift to transport the machine. Raise the ma-
Transportation
chine max. 20 mm and secure it against slipping off.
The connecting cable must have a power plug approved in the specific
Set-up
country. The power plug may only be connected to the power cable by a
qualified specialist.
Observe the country-specific safety and accident prevention regulations
Operator's obliga-
tions
and the legal regulations concerning industrial safety and the protection of
the environment.
All warnings and safety signs on the machine must always be in legible
condition and may not be removed. Missing or damaged labels must be
replaced immediately.
Service Instructions 610/630 - 00.0 - 10/2014
Safety
5
Advertisement
Table of Contents
