Table of Contents
Advertisement
Thread Trim - Thread cutter
Parameter
Speed
Thread Tension Needle
Thread Tension Hook
Turn Backward after
Trimming
Speed
Parameter
Maximum Speed
Positioning Speed
Softstart Speed
Number Stitches Softstart
Stop Positions
Parameter
Stop Position after Sewing
Stop Position Needle Up
Stop Position Needle Down
Foot - Sewing foot
Parameter
Foot Lift between Seam
Foot Lift at Seam End
Duration Thread Tension after Seam End - Duration for needle
thread tension closed at the seam end
Setting range in seconds: 1 - 7
80
Meaning
Speed when cutting thread (class 650): 50 - 200 rpm
Needle thread tension when the thread is cut in percent:
1-50
Looper thread tension when the thread is cut in percent:
0-5
Turn backward after cutting thread (class 650):
• 0: off
• 1: on
Meaning
Max. permissible speed: 100 - 4000 rpm
Speed when positioning: 10 - 70 rpm
Speed on soft start: 10 - 1000 rpm
Number of softstart stitches: 1-10
Meaning
Stop position after sewing (needle up)
not used
Needle down, basic position of the arm shaft: 120 - 204°
Meaning
Lifting foot in the seam
• 0: off
• 1: on
Lifting foot at the seam end
• 0: off
• 1: on
Service Instructions 610/630 - 00.0 - 10/2014
Software settings
Advertisement
Table of Contents
