Removing And Installing The Throat Plate - DURKOPP ADLER H-Type 969 Service Instructions Manual

Basic Principles of Working with the Machine

3.3.8 Removing and installing the throat plate

Fig. 8: Removing and installing the throat plate
Removing the throat plate
1. Raise the sewing feet.
2. Loosen the screw (2).
3. Remove the throat plate (1).
Service Instructions 969 - 01.0 - 12/2015
(1) - Throat plate
WARNING
Risk of injury!
Risk of crushing injuries and stab wounds from
sharp and moving parts.
Switch the machine off before you remove or install
the throat plate.
(2) - Screws
①
②
15