Table of Contents
Advertisement
System Menu
Auto Error Clear
6-74
NOTE:
If you select [Off] for Auto Sleep, the time display does not
appear.
Use the procedure below to set the Auto Sleep time.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Sleep Timer.
3
Press [+]/[–] or the
numeric keys to
enter the time until
Auto Sleep is turned
on.
4
Press [OK].
If an error occurs during printing, the print job stops to wait for the next step
to be taken by the user. In the Auto Error Clear mode, automatically clear
the error after a set amount of time elapses.
The following errors are automatically cleared.
Print overrun
Memory is full
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Auto Error Clear.
Date/Timer - Sleep Timer
Set the amount of time to wait before automatic Sleep Mode.
Use [-]/[+] or the numeric keys to enter a number.
(1 - 240)
Status
ADVANCED OPERATION GUIDE
min.
Cancel
OK
10/5/2006
10:10
Advertisement
Table of Contents
