Scan/Print - Kyocera Mita KM-8530 Operation Manual

Positioning originals in Mixed original mode
Mixed size originals can be copied together from the document feeder.
To use the Mixed original mode, see procedure on p. 8-6 to p. 8-7.
1.
Arrange originals in order.
Arrange the mixed size originals as illustrated below.
• Before placing originals in the tray, be sure the document feeder is
• Be sure not to use unsuitable RADF originals. See p. 11-8 for details.
See p. 11-9 for available combinations of mixed originals.
2.
Position mixed originals FACE UP, aligned with the left rear side of
the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
3.
Adjust paper guides.
Positioning Originals (continued)
HINT
To the
To the left
depth
Setting
direction
Reminder!
closed fully. Once closed, do not open the document feeder, otherwise
the selected copy conditions may be altered automatically.
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop

Scan/Print

Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
DF-630/635
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-3