Safety Precautions - Mitsubishi Electric Got 1000 Training Manual

When designing a system, always read the relevant manuals and give due consideration to safety.
In addition, pay careful attention to the following points for proper handling during training.
[Precautions during training]
Danger
To prevent electric shock, do not touch the terminal block while the power is supplied.
When opening the safety cover, turn off the power, or make sure that it is sufficiently safe.
Caution
Follow the instructor's directions during training.
Do not remove training machine units or change wiring without permission.
Doing so could cause a breakdown, faulty operation, injury, or fire.
Turn the power OFF before mounting or removing a unit.
Doing so while the current is ON could cause a breakdown or electric shock.
If the training machine emits a strange odour or sound, press the "Power Switch" or the "Emergency
Switch" to stop the machine.
If any trouble occurs, contact the instructor right away.

Safety Precautions

(Make sure to read before training)