Mitsubishi Electric Got 1000 Training Manual page 118

(3) Adjust the system alarm size.
Adjust the size of system alarm so that all the system alarms are displayed.
Point
An adjustment of display area is required as illustrated below to keep part of
alarm message from dropping out of the frame.
400 Unable to communicate with CPU
9 AC down error
803 Transient error
Error message (Max. 64 digits)
Enlarge the size until the time of the alarms occurred is displayed on the right edge.
Remarks
Size change of object with shape
(1) Method of changing size
1) Select the object to be changed in size.
2) Position the cursor over the sizing handle, click and drag it to change
the desired size.
322 Dedicated
1) Position the cursor over the handle, click and
drag it to the desired size for displaying the
system alarm.
2) When the object and shape are adjusted,
adjustment is completed.
Set in three lines.
The time of the alams occurred (Fixed eight digits)
322 Dedicated device is out of range.
5 - 46