Mitsubishi Electric Got 1000 Training Manual page 115

Point
(1) Date and time displayed by time display function
The time display function represents the date and time of the GOT maintained
by the internal clock function.
The clock function sets the clock to be used as standard for adjusting the
time between the GOT and PLC CPU.
The way of adjusting the time between the GOT and PLC CPU differs as
follows depending on the clock to be used as standard :
(a) Using the time of clock data in PLC CPU as standard (time adjustment)
Set the clock data of GOT to the time of clock data in PLC CPU.
(b) Using the time of clock data in GOT as standard (broadcast)
Set the clock data of PLC CPU to the time of clock data in GOT.
A battery is required for the clock data to be maintained while the power
to GOT is off.
(2) Change in settings of clock function
The settings of clock function can be changed using the clock setting
function provided in GT Designer2 or Utility function.
Refer to chapter 2 of the GT Designer2 Version2 Screen Design Manual for
details on time display function.
(b) Broadcast
(a) Adjust
5 - 43