Mitsubishi Electric Got 1000 Training Manual page 132

(From previous page)
(3) (2)
(4) (1)
3)
4)
5)
(Next page)
2)
6)
6 - 4
2) Place the numerical display, and make the
settings as follows:
[Basic tab]
Device: D30
Number of display digits: 1
Size: 2×2
3) Copy and paste the numerical display created
in 2), and make the settings as follows:
(1) Device setting "D31"
(2) Device setting "D32"
(3) Device setting "D33"
(4) Device setting "D34"
4) Create characters with text.
5) Create a display lamp with the following
settings using the same procedure for
creating a lamp display in section 5.4.
[Basic tab]
Device: M33
Figure: Circle: Circle_3
Lamp color (when it is ON): red
[Text/Lamp tab]
Display position: Bottom
Text: Operating
Copy OFF → ON (All Settings)
6) Copy and paste the lamp created in 5), and
make the settings as follows:
[Basic tab]
Device: M34
[Text/Lamp tab]
Text: 8 hours have elapsed.
Copy OFF → ON (All Settings)