Appendix 1.4 Alarm History Display Function Settings - Mitsubishi Electric Got 1000 Training Manual

Appendix 1.4 Alarm history display function settings

1)
2)
3)
(1) Select the [Object] - [Alarm History] menu.
(2) Placement of alarm history display
(3) Common settings for alarm history ([Device (Common)]/[Option (Common)] tab)
Common settings for alarm history are set for each project.
Settings for individual base screen are not necessary.
Point
(1) The settings whose tab names are marked with (Common) in the dialog box
are common settings in project.
(2) Common settings for alarm history display can also be set by the following
operations.
• Select the [Common Settings] → [Alarm History] menu.
• Select the [Project] → [Common Settings] → [Alarm History.] of the project
workspace.
1) Move the cursor to the desired position
where the alarm history to be placed, and
click the mouse button.
2) Double-click the alarm history display
which has been placed.
The
displayed.
1) Set a device to be monitored.
In this case, set [Number of alarms to
monitor] to "4" since alarms are set at
four bit signals, "X2 to X5".
4)
2) Select "Window screen" for [Detailed
alarm display type].
3) Select the top of list, click the Dev
button to set the monitor device to "X2".
Devices X3 to X5 are consecutively
assigned.
4) Set "2" for in [Detail].
The window screen No. to display the
detail appears.
Project common setting
(Only one setting can be set through the project.)
Appendix 8
Alarm History dialog box is