Method For Checking Devices Using The Created Screen Data - Mitsubishi Electric Got 1000 Training Manual

5.12 Method for checking devices using the created screen data

To identify the device used for the created screen data, the Device List function of GT
Designer2 will be useful.
Display a list of devices used for the screen data created during this training here.
Point
When the desired device is not shown in the list, click the Find button to specify
the appropriate device.
Refer to chapter 12 of the GT Designer2 Version Basic Operation/Data Transfer
Manual for details on this setting.
A device list can be displayed in either one of the
following two ways:
• a list grouped by the project data
• a list grouped by one screen
Select a list from the project data in order to
display a list of devices for the set of created data
here.
Click the [Tools] - [Device List] - [Project] menu.
The Device List dialog box is displayed.
As a list of bit devices is shown right after the
Device List dialog box appears, check what bit
devices are included in the list.
Click the [Word] tab to see a list of word devices.
A list of word devices is displayed.
5 - 56