Saving The Project Data - Mitsubishi Electric Got 1000 Training Manual

4.2.5

Saving the project data

1)
2)
3)
This section explains operations to save the created project data.
This section explains with an example of saving to a floppy disk (A drive).
Point
When the project data is saved, not only the created screen, but also common
settings such as connection settings, parts Information, etc., are saved in one file.
If saved files are copied onto another PC, they can be used as they are.
However, only the user-made library information is saved in a separate file, so
when using the user-made library information, it is necessary to make a separate
copy of the library data.
For details on saving the library, refer to the GT Designer2 Version2 Basic
Operation/Data Transfer Manual.
1) Click on the [Project] – [Save As] menu.
2) When the dialog box appears, click
then click "3½ Floppy [A:]".
3) Enter the file name (project name) of the
screen data file to be saved.
Enter "BASIC" here.
4) Click the Save button to save the screen data.
4)
4 - 16
, and