Numerical Display Settings - Mitsubishi Electric Got 1000 Training Manual

5.3.2

Numerical display settings

1)
2)
3)
4)
5)
1)
Making the settings of numerical display (D20)
(1) Click on the toolbar (Object), and then click any place in the drawing
screen.
(2) Double-click the numerical display, and make the settings as follows:
(the same procedures as those described in section 5.3.1)
(3) Making settings on the screens
(the same procedures as those described in section 5.3.1)
1) Set "D20" for [Device].
2) Select "4" for [Digits].
3) Select "16dot HQ Gothic" for [Font].
4) Set [Size] to "2 x 2".
5) Click the OK button.
1) On the
characters for title and unit.
This completes the settings of the numerical
display.
5 - 24
figure drawing screen, create