Mitsubishi Electric Got 1000 Training Manual page 44

(From previous page)
8)
(Next page)
5) When the left screen appears, set the
5)
communication driver as follows.
6)
Communication driver: Bus connection Q
<Note: Always change default setting from
"A/QnA/QCPU, QJ71C24" to Bus connection
Q. >
• There are two types of bus connection
communication drivers. Select a driver that
matches the PLC to be connected.
Bus connection Q
Bus connection A/QnA : With connection to
6) Click the Details... button.
7) When the left screen appears, set the Stage
No. and Slot No. as follows.
Stage No.: 1
Slot No.: 0
7)
8) Click the OK button.
9) Click the Next button.
9)
4 - 4
: With connection to
the QCPU
the ACPU, QnACPU