Operation Check 2 - Mitsubishi Electric Got 1000 Training Manual

5.10 Operation check 2

Display the download screen of the project, and download all the data to the GOT.
Reset the PLC CPU using the RESET key switch, and then switch to RUN.
Check if the comment display in screen No.1 is properly displayed, and that the
overlap window (Window Screen No. 1) appears correctly here.
(1) Test 1
Perform the following tests in screen No. 1.
Test object
Item
Touch operation
Screen state
Result of
operation
Write device
(2) Test 2
Perform the following tests in screen No. 1.
Test object
Item
Touch operation
Screen state
Result of
Write device
operation
Read device
Planned operating time (numerical input)
Touch the numerical input area.
When a key window screen appears, enter the numeric value
(15), and then press Enter of the key window.
D10
Line stop switch
Touch
The switch is pressed.
M10: ON
—————
5 - 52
Comment display
—————
Comment "Line operating"
appears.
—————
Y7B: ON