Mitsubishi Electric Got 1000 Training Manual page 176

(From previous page)
6)
3), 4)
3)
5)
7)
3) Set [Connection Setup].
PC side I/F: Serial USB
PLC side I/F: PLC module
Other station: No specification
4) Double-click [CPU module] of PLC side I/F to
display [PLC side I/F Detailed setting of PLC
module].
8)
5) Check [via GOT(Bus) transparent mode] in
[PLC side I/F Detailed setting of CPU module],
and click the OK button.
Check
transparent mode] when connecting PC and
GOT with the RS-232 cable.
6) Go back to [Connection Setup], double-click
[Serial USB] of PC side I/F to display [PC side
I/F Serial Setting].
7) Check [USB] in [PC side I/F Serial Setting]
and click the OK button.
8) Go back to [Connection Setup], click the
Connection test button, and check that the
connection to QCPU is established.
Appendix 22
[via GOT (direct connection)