Mitsubishi Electric Got 1000 Training Manual page 49

(From previous page)
4) Extend I/F Settings.
Set the 1st stage extend I/F1-1 as described
below.
4)
(Settings for this item have already been
5)
performed in the new project wizard described
in section 4.2.1.)
CH No.: 1
Driver: Bus connection Q
5) Click the Detail Setting... button.
6) When the left screen appears, set the stage
No. and slot No. as follows.
(Settings for this item have already been
6)
performed in the new project wizard described
in section 4.2.1.)
Stage No.: 1
Slot No.: 0
7) Click the OK button.
7)
4 - 9
• CH No. ····· Select a CH No. that matches
the usage.
0 : not used
1 to 4 : FA device, for
* : Gateway function, for
Ethernet download
• Driver·········Select the PC communication
driver to be installed in the
GOT.
• Detail setting········
Perform settings including
driver stage No., slot No., etc.
microcomputer
settings (settings to
match the channel
No. for connecting
the controller)