Mitsubishi Electric Got 1000 Training Manual page 152

(From previous page)
9)
(Next page)
5) Touch the
the device number.
6)
6) Make the settings as follows and touch the
Enter key.
5)
Device name: "D"
Device number: "31"
Value: "5"
7) Repeat the procedures, and,
8)
set the value of "D32" to "9",
set the value of "D33" to "5",
and set the value of "D34" to "7".
8) When setting is complete, touch x to exit the
setting key window.
9) When the Test menu screen appears, touch
the CANCEL key.
10) Go back to the device monitor screen, check
10)
that the value just entered is properly
displayed, and touch the MENU key.
6 - 24
key, and move the cursor to