Mitsubishi Electric Got 1000 Training Manual page 172

2) Memory → GOT
The data can be installed/downloaded into the GOT in either of the following two
methods.
• How to Install while the GOT is powered ON
Refer to the GT Designer2 Version2 Basic Operation/Data Transfer Manual for
the installation method.
• Installation by the utility (program/data control) function of the GOT
Refer to the GT15 User's Manual/GT11 User's Manual for the installation
method.
Point
Precautions for data transfer
(1) Memory card
When downloading/installing the various types of data (Boot OS, OS, project
data, special data) into a memory card, do not store any other data into that
memory card.
The other data are all erased at the time of download/installation.
Storing the Boot OS data and the other data (OS, project data, and special
data) in the same memory card should also be avoided.
(2) Data stored in GOT
When the Boot OS and OS are installed, the project data stored in the
project folder in the GOT is deleted.
When it is necessary to back up the project data, upload the data to the PC
or memory card (CF Card) before installing the OS.
(3) Precautions in installing Boot OS and OS
Boot OS/OS installation cannot be interrupted.
Note that the GOT may become non-functional if one of the following is
performed during installation:
• Remove the CF card.
• Power off the GOT.
• Press the reset button of the GOT.
Appendix 18