Table of Contents
Advertisement
52
16
S
F
T OR AG E
R E Q U E N C Y
Fig. 73
SCAN menu
5 s
10 s
15 s
20 s
25 s
Fig. 74
S
C AN NI N G
Pushing the SCAN button located in cluster FUNCTION will activate scanning
of channels which are earmarked for scanning (CHANNEL - see Page 34).
These frequencies will be checked for a signal.
The RX will scan the channels from lower to higher frequencies.
If the squelch is engaged scanning will stop when a signal on a scanned
channel opens the squelch
If the squelch is open, the RX will pause on the scanned frequency for a
time defined. After this time has elapsed the scanning will continue.
If the squelch engages during the pause scanning will continue
immediately.
When pushing SCAN
SCAN-LED will be on
the frequency of the standby VFO will disappear. Instead information
about the scanned channel is displayed as in channel modus (see Page
34)
SCAN softkey menu will be called up:
Delay time is 5 seconds
Delay time is 10 seconds
Delay time is 15 seconds
Delay time is 20 seconds
Delay time is 25 seconds
Delay time is infinite
Scanning will be terminated upon activating PTT, VFO tuning, STEP-VFO or
pushing SCAN. The frequency of the standby VFO will reappear, SCAN-LED
will be off.
SCAN
F
T
U N C T I O N
E M P O R AR Y D I S AB L E D
Advertisement
Table of Contents
