Table of Contents
Advertisement
PT-8000A Operating Manual v2.00.33
14
S
SQL
QU E L C H
Fig. 68
The SQUELCH (SQ) is activated by default and will be
affected by the control SQL which is located as depicted.
The threshold for squelch operation is adjusted by turning
the knob.
Once the SQL is activated and the threshold has
engaged i.e. the RX is silent, push and hold the SQL to
override the threshold momentarily.
For permanently deactivating squelch function set knob SQL fully counter
clockwise.
A triangle ("") is moving in the S-meter (active RX only) according to the
threshold setting of the SQL control.
Squelch function is not possible in any operation mode if AGC is deselected
and manual gain control is engaged (see Page 51).
49
Fig. 69
Advertisement
Table of Contents
