30
11.1.3 Transverter Operation
Transverter Select menu
Fig. 33
Transverter Band Select menu
Fig. 34
Pushing Trans softkey (VHF menu) will call up allocated Transverter Select
menu. If a transverter is already selected the softkey is displayed inverse.
Return to VHF menu (see previous Page).
Select transverter #1; the softkey will be displayed inverse; pushing again will
call up the Transverter Band Select menu (see below).
Select transverter #2; the softkey will be displayed inverse; pushing again will
call up the Transverter Band Select menu (see below).
VFO menu will be called up (see Page 41).
If transverter 1 is selected (displayed inverse) pushing again Trans 1 softkey will
call up the Transverter Band Select menu (applies accordingly Trans 2)
Return to VHF menu (see previous Page).
Activates 2 m band (144 ... 148 MHz); the softkey will be
displayed inverse; push again and hold allows to select a
transverter operating band using STEP-VFO knob.
Activates 6 m band (50 ... 54 MHz); the softkey will be displayed inverse (as
shown here); push again and hold allows to select a transverter operating
band using STEP-VFO knob.
Activates 10 m band (28 ... 30 MHz); the softkey will be displayed inverse;
push again and hold allows to select a transverter operating band using STEP-
VFO knob.