Table of Contents
Advertisement
54
17.2 Calibration of Internal Reference
CAL menu
Fig. 78
Ref CAL menu
Fig. 79
Pushing CAL softkey (MENU menu) will call up the Calibration menu:
Return to MENU menu (see previous Page).
The Ref CAL menu will be called up for Calibration of internal Reference (see
below); a dialog box is displayed instead of the standby VFO frequency (see
Page 55 Figure 80a).
Pushing Ref CAL softkey (CAL menu) will call up Reference Calibration menu; a
dialog box is displayed instead of the standby VFO frequency (see next Page
Figure 80a):
Return to CAL menu (see above).
Activate input mask for correction value of reference oscillator (displayed
inverse; see next Page Figure 80b).
Store the correction value (see next Page Figure 80d).
Set correction value back to zero.
Advertisement
Table of Contents
