Table of Contents
Advertisement
6
A2-
Fig.
16
A2-
Fig.
17
A2-
CPU selection
Return to MENU menu (see Manual Page 53).
Select MAIN-CPU for Update, see A2.9.
Select RX-CPU for Update, see A2.10.
Select ANT-Tuner-CPU for Update, see A2.10.
The screen Software Version with a list of the currently
loaded software versions of PT-8000A will be shown on the
main display area.
An update of the DISPLAY software is currently not required.
Select from the Software menu (Figure A2-16) the one CPU, of which new
operation program you have selected in Chapter A2.7.2 to the PC program.
Depending on CPU selection, the update process will be slightly different:
The update of the MAIN-CPU is described in the following chapter A2.9.
The update of the RX- and the ANT-Tuner-CPU is described in the after
next chapter A2.10
Advertisement
Table of Contents
