Connection Sockets J12 - J22 And Operating Elements - Hilberling PT-8000A Operating Manual

PT-8000A Operating Manual v2.00.33

4.1.2 Connection Sockets J12 - J22 and Operating Elements

No Name
E Socket 4 mm
Threaded Pin M6
J12 10 MHz Ref.
OUT
J13 10 MHz Ref.
IN
J14 TX ext.
+20 dBm
J15 ext. SPKR EIA-453 / IEC 60603-11
add. TRS 3.5 mm Socket
J16 ext. SPKR EIA-453 / IEC 60603-11
alt. TRS 3.5 mm Socket
J17 AUX-TX
(PTT/ALC) (D-SUB 9-pol)
J18 DC
IN
J19 Keyboard
PS/2 Socket
J20 AUDIO
IN/OUT (D-SUB 15-pol)
J21 Transverter
(D-SUB 25-pol)
J22 RS232
Remote
P7 TX-ALC
P8 AUDIO IN
Type
Grounding wire (p 10 / Fig. 10) – must be connected toHN-8000 power supply
Grounding stud – must be connected to station ground
BNC Input for an external 10 MHz reference signal (clock) for synchronization of PT-8000A to other
equipment. The signal delivers +1dBm ±3dB level
BNC Output of an external 10 MHz reference clock for synchronization of external equipment to
PT-8000A. Input 10 MHz signal level > -10dBm.
BNC TX external output (1.8...148 MHz). Level is +20 dBm to drive transverter or external power
amplifier
60 kHz output: Connection to sound card for panorama display/waterfall diagram.
Requirements: Soundcard with 192 kHz sample rate ; Windows
8000A IF-Monitor", connecting cable
Output audio MAIN- and SUB-RX/ only SUB-RX (Audio Norm/Split); 4.5 W max. @ 8 Ω;
connection external speaker, by default to Power Supply HN-8000 (cable P. 10 / Fig. 11);
DE-9 Auxiliary output/input for TX (wiring see P. 6 / Tab. 4)
CliffCon Power connector for interconnection cable to HN-8000 power supply DC 13.8V / 50V (cable
4-pol P. 10 / Fig. 9)
mini-DIN Access to Main-CPU; further functions TBD
DA-15 Various audio signals MAIN/SUB in- and output (wiring see P. 6 / Tab. 4)
DB-25 Connect control cable to transverter (wiring see P. 6 / Tab. 4)
USB-B Input/output data (cable P. 10 / Fig. 12)
1. Connect external equipment to remotely control the PT-8000A (CAT)
2. Interface to update firmware of PT-8000A
Sensitivity of ALC input (J17, pin 6) from external PA to reduce TX power out (0 ... −10 V)
Sensitivity of Audio data input (J20, pin 2) – rated 0 dBm @ 50 Ω
Description
® PC ; Hilberling software „PT-
5
Fig. 3
Tab. 3