Table of Contents
Advertisement
Picture 72
AGC threshold
Turning the control RF will adjust the AGC threshold to a level which can be
monitored by observing the S-Meter. The AGC threshold can be raised to a
certain level where signals below are significantly less audible than signals
above the threshold where AGC action will level out the audio.
AGC OFF
Pushing the RF control will cut off any AGC action.
In case a signal is present the audio volume may exceed the comfort level
Turning the RF control allows to adjust the RF gain according to the situation.
17
F
RE Q U E N C Y
PT-8000 A · B · C User Manual
The control knob RF is located as depicted. It allows to cut
off AGC action by pushing and to adjust an RF threshold
by turning.
•
1. The display will show AGC-OFF
•
2. AGC-LED will be on
•
3. S-Meter will fall back to zero
S
(SCAN)
CA N NI NG
C–53
Advertisement
Table of Contents
