Table of Contents
Advertisement
PT-8000A Operating Manual v2.00.33
19.2.4 TX Filter Select / TX Shift Select
TX-Filter / TX-Shift menu
Fig. 96
Pushing TX-Fi / TX-Sh softkey (TX menu) will call up the TX-Filter TX-Shift menu:
Return to TX menu (see Page 62).
Select TX filter bandwidth; softkey t will be displayed inverse for
4 seconds; along the way turn STEP-VFO knob to select new
value; after a period of 4 seconds without any activity or when
pushing the knob selecting mode will be terminated.
Select TX passband shifting: The Softkey will be displayed inverse
for 4 seconds; along the way turn STEP-VFO knob to select new
value; after a period of 4 seconds without any activity or when
pushing the knob selecting mode will be terminated.
Turning STEP-VFO/MEM/CH knob will allow the following:
Filter – Select TX filter bandwidth.
Tuning range:
Increments:
Shift –
Select TX passband shifting.
Tuning range:
Increments:
Pushing STEP-VFO/MEM/CH knob or a period of 4 seconds without any
activity will terminate selecting mode.
2.2 ... 3.4 kHz
0.1 kHz
0 ... 300 Hz
25 Hz
65
Advertisement
Table of Contents
