Table of Contents
Advertisement
42
11.7 SPLIT Operation
The VFO SPLIT operation in the PT-8000A is realized by using the MAIN and
the SUB-RX. The selected VFO from the MAIN-RX determines the RX frequency,
the selected VFO from the SUB-RX determines the TX frequency.
To enable the VFO SPLIT operation, the MAIN-RX must be the active RX and
the SUB-RX operates in the background.
The PT-8000A stays in the current operation mode of the MAIN-RX when
transmitting, even though there is selected a different mode in the SUB-RX.
Only the frequency of the SUB-RX will be used.
Procedure:
Tune with the active VFO from the MAIN-RX to the desired receive
frequency.
Tune with the active VFO from the SUB-RX to the desired transmit
frequency.
When pushing SPLIT softkey (VFO menu):
When pushing PTT, the desired frequency from the SUB-RX will be used for
transmit instead the receive frequency of the MAIN-RX.
To the left of the Display, below operation mode indicator,
displayed
The softkey will be displayed inverse
Pushing SPLIT again will terminate VFO SPLIT operation.
SPLIT
will be
Advertisement
Table of Contents
