Table of Contents
Advertisement
14
A2-
Fig.
46
A2-
Fig.
47
A2-
The display will now show the total number of bytes to be
transferred and the state of the bytes current transferred.
For the amount of data in the display of the PT-8000A and the program
window on the PC it is:
Total Bytes = Data Length (entire amount of data to be
Prog. Bytes = Bytes Sent (amount of data transferred by now)
The program transfer may take up to 30 minutes - depending on the size of
the operation program.
When data transfer is completed, the display of the PT-8000A will show a new
message.
Message: The program transfer has been completed
successfully.
Prompt to restart the PT-8000A.
Display of current and new program version.
The display will now show the total number of bytes to be
transferred and the state of the bytes transferred.
The PC also reports in a message box that the program transfer has
been completed successfully and prompts to restart the PT-8000A.
transferred)
On the PC the title
bar of the main
window will show
that the program
transfer has been
started (Upload).
The field Bytes Sent
and the blue
progress bar will
show the state of
data transfer.
Advertisement
Table of Contents
